Custom designed cross infection barriers designed specifically for the CarieScan PRO.

Fitting the CarieScan Sleeve:

1. Make sure the collar is fitted.
2. Attach a sensor
3. Plug the Lip Hook Cable into the side of the CarieScan PRO.
4. Slide the CarieScan PRO under the white tab
   
5. Locate the sensor tip through the hole at the end of the sleeve.
   
6. Peel off the top layer by pulling the blue tab
   
7. Peel off the paper backing
   

Your CarieScan PRO is now ready for use.

Infection Control